GOST 2712-2021 PDF

Full title and description

GOST 2712-2021 — "Grease AMS. Specifications" (Russian: "Смазка АМС. Технические условия"). The standard establishes technical requirements, composition, test methods, acceptance rules, transportation, storage and manufacturer guarantees for AMS-brand greases (marks АМС-1 and АМС-3).

Abstract

GOST 2712-2021 is an interstate (GOST) standard that replaces the earlier 1975 edition and defines mandatory technical conditions for AMS greases used in industrial and marine applications. It specifies product marks, chemical and physical composition limits (including aluminum oleostearate content for AMS-1 and AMS-3), safety and environmental requirements, sampling and test methods, packaging, shelf life and manufacturer warranties. The standard was approved in 2021 and came into force in 2022.

General information

• Status: In force / Active.
• Publication date: Approved 9 November 2021; effective (date of introduction) 1 July 2022.
• Publisher: Interstate Council / Federal Agency for Technical Regulation and Metrology (Rosstandart); published in official collections (Russian Institute of Standardization / FGBU RST).
• ICS / categories: ICS 75.100 (Lubricants, industrial oils and related products).
• Edition / version: 2021 (GOST 2712-2021).
• Number of pages: 12 pages.

Scope

The standard applies to AMS grease products (marks АМС-1 and АМС-3) and sets requirements for their composition, physical and chemical properties, safety, environmental protection, acceptance testing, methods of testing, storage, transportation and manufacturer guarantees. It is intended to ensure consistent quality and to support conformity with regional technical regulations on lubricants and special fluids.

Key topics and requirements

• Designation of marks: AMS-1 and AMS-3 with specified formulations and part-component limits.
• Composition requirements (example): aluminum oleostearate content and base oil characteristics (viscosity classes referenced to relevant GOSTs such as GOST 6411).
• Physical and chemical property limits (consistency, penetration, dropping point, corrosion protection, etc.).
• Safety and environmental requirements for manufacture, labeling and use.
• Acceptance rules and sampling procedures for batch verification.
• Standardized test methods to verify compliance (specified in the standard’s methods section).
• Storage, packaging and transportation conditions; manufacturer guarantees including stated shelf life.

Typical use and users

Typical users include lubricant manufacturers, quality and compliance laboratories, procurement and supply departments (including shipyards and heavy industry), maintenance teams and certificating bodies within the EAEU / CIS region. The standard is used to specify product characteristics in contracts, to perform acceptance testing and to ensure regulatory conformity for lubricants intended for industrial and marine applications.

Related standards

Related documents and references commonly cited with GOST 2712-2021 include earlier national GOSTs that it replaces (GOST 2712-75), standards for base oils (e.g., GOST 6411 and related test-method GOSTs), and regional technical regulations on lubricants (Customs Union / EAEU TR ТC 030/2012). National and inter‑state test-method standards referenced in the normative references section are used to implement the specified test procedures.

Keywords

GOST 2712-2021; AMS grease; Смазка АМС; АМС-1; АМС-3; lubricant specifications; aluminium oleostearate; technical conditions; storage and shelf life; test methods; Rosstandart.

FAQ

Q: What is this standard?

A: GOST 2712-2021 is an interstate standard titled "Grease AMS. Specifications" that sets technical requirements and test methods for AMS-brand greases (marks АМС-1 and АМС-3).

Q: What does it cover?

A: It covers composition and formulation limits, required physical and chemical properties, safety and environmental provisions, acceptance and test procedures, packaging, storage and manufacturer guarantees (including shelf life).

Q: Who typically uses it?

A: Manufacturers and formulators of greases, testing laboratories, procurement and maintenance departments in industrial and marine sectors, and conformity assessment bodies operating in the EAEU/CIS area.

Q: Is it current or superseded?

A: Current — GOST 2712-2021 is in force. It was approved on 9 November 2021 and introduced (came into effect) on 1 July 2022; it replaces the older GOST 2712-75.

Q: Is it part of a series?

A: It is a standalone interstate (GOST) standard concerning AMS grease but references and aligns with other lubricant-related standards and regional technical regulations (for example, base-oil standards and TR ТС 030/2012 on lubricants).

Q: What are the key keywords?

A: AMS grease, Смазка АМС, АМС-1, АМС-3, lubricant specifications, aluminium oleostearate, technical conditions, shelf life, test methods.