GOST 11110-2022 PDF

Full title and description

ГОСТ 11110-2022. Межгосударственный стандарт. Смазка ЦИАТИМ-202. Технические условия — Grease CYATIM-202. Specifications. The standard establishes technical requirements, test methods, safety and environmental provisions, rules for acceptance, transportation, storage and manufacturer guarantees for the plastic grease known as ЦИАТИМ-202 (CYATIM-202).

Abstract

GOST 11110-2022 specifies the composition, required physical and performance properties, testing procedures and handling requirements for CYATIM-202 grease intended for lubricating rolling bearings that operate in a wide temperature range. It replaces the earlier GOST 11110-75 and was adopted as an interstate/national standard by Russian authorities.

General information

• Status: Active (introduced and in force as a national/interstate standard).
• Publication date: Adopted by order of the Federal Agency on Technical Regulation and Metrology (Rosstandart) on 10 October 2022; date of entry into force (date of introduction) 1 July 2023.
• Publisher: Федеральное агентство по техническому регулированию и метрологии (Rosstandart); prepared by FGBU "Rostandard" / Russian Institute of Standardization (developer).
• ICS / categories: 75.100 (Lubricants, oils and related products).
• Edition / version: 2022 (GOST 11110-2022).
• Number of pages: 8 pages (standard document length as published).

Scope

The standard applies to the plastic grease CYATIM-202 intended for lubricating rolling bearings operating in the temperature interval from −50 °C to +120 °C. It covers technical requirements (composition and properties), methods of testing, safety and environmental protection measures, acceptance rules, transportation and storage, and manufacturer guarantees. The grease designation according to GOST 23258 is НЛи 5/12-2.

Key topics and requirements

• Composition and manufacture: thickened mixture of transformer and aviation oils (or specified transformer/aviation oil grades) with lithium soaps of higher fatty acids and antioxidant additive (diphenylamine) — manufacturing technology consistent with tested samples.
• Physical and performance limits: effective viscosity at −30 °C (at specified shear) not more than 13·10³ Pa·s; mechanical strength at 50 °C not less than 150 Pa; drop point not below 175 °C.
• Corrosion and colloidal stability: must withstand corrosion tests on metals per referenced methods; oil separation (colloidal stability) not more than 20% by the specified test.
• Referenced test methods: includes and references multiple GOST methods (viscosity, drop point, penetration, corrosion, mechanical strength and others) that specify how to verify properties.
• Safety, environmental and handling requirements: provisions for occupational safety, fire/explosion safety and environmental protection are included; transportation and storage conditions are specified.
• Acceptance and guarantees: rules for batch acceptance, sampling, and manufacturer guarantees are defined in the standard.

Typical use and users

CYATIM-202 grease is intended primarily for lubrication of rolling bearings operating in cold-to-moderate temperature conditions (−50 °C to +120 °C). Typical users include lubricant manufacturers, industrial maintenance and reliability engineers, equipment OEMs and repair facilities, testing laboratories and procurement/specification teams responsible for selecting greases for bearing applications. The standard is used to ensure consistent product quality and to specify test methods and acceptance criteria.

Related standards

The standard references a number of interstate (GOST) documents for measurement, test methods and classification, including (but not limited to) GOST 1.0 and 1.2 (standardization system rules), GOST 23258 (naming and designation of plastic greases), GOST 7143 (mechanical strength of greases), GOST 6793 (drop point), GOST 9.080 (corrosion testing), and many others cited in the normative references and test-method clauses. It replaces GOST 11110-75.

Keywords

CYATIM-202, ЦИАТИМ-202, grease, lubricant, rolling bearings, lithium soap grease, diphenylamine, viscosity, drop point, GOST 11110-2022, Russia, technical specifications.

FAQ

Q: What is this standard?

A: GOST 11110-2022 is the interstate/national standard that sets technical requirements and test methods for CYATIM-202 grease (Смазка ЦИАТИМ-202). It was adopted by the relevant standardization bodies and introduced for use in Russia and participating states.

Q: What does it cover?

A: It covers the grease's composition and manufacturing basis, required physical and performance properties (viscosity at low temperature, mechanical strength, drop point, corrosion resistance, colloidal stability, etc.), referenced test methods, safety and environmental requirements, acceptance rules, transportation and storage, and manufacturer guarantees.

Q: Who typically uses it?

A: Manufacturers of lubricants, maintenance and reliability engineers, OEMs specifying greases for equipment, testing laboratories performing conformity checks, and procurement/specification teams use the standard to ensure CYATIM-202 meets required properties for bearing lubrication.

Q: Is it current or superseded?

A: GOST 11110-2022 is current (active) and replaces GOST 11110-75; it was introduced by Rosstandart's order (No. 1115‑ст) and came into effect on 1 July 2023.

Q: Is it part of a series?

A: The document is a stand‑alone interstate GOST for CYATIM-202 but is linked by normative references to other GOSTs covering test methods, safety and measurement systems (for example GOST 23258, GOST 7143, GOST 6793 and others listed in the normative references).

Q: What are the key keywords?

A: Key keywords are CYATIM-202, grease, lubricant, lithium soap, diphenylamine, rolling bearings, low-temperature lubrication, viscosity, drop point, GOST 11110-2022.