GOST 1180-91 PDF

Full title and description

GOST 1180-91 (ГОСТ 1180-91) — national standard issued in 1991. This document sets out technical requirements, dimensional and tolerance specifications, inspection and testing procedures, marking and packaging rules for the product family identified by the standard number. The official Russian-language title is given as ГОСТ 1180-91; an English rendering is commonly used as "GOST 1180-91 (State Standard)". Exact product designation and wording should be confirmed from the official text.

Abstract

This standard defines mandatory or recommended requirements for a specific industrial product or component under the GOST system as published in 1991. Typical contents include scope and application, normative references, definitions, technical requirements (materials, dimensions, tolerances), methods of sampling and testing, acceptance rules, marking, packing and transportation. It was published under the Soviet / Russian national standards system and may have been later reaffirmed, amended or superseded by subsequent national or interstate standards.

General information

• Status: Original national standard published in 1991. Current legal status should be verified with the national standards body (may be active, amended, or superseded).
• Publication date: 1991 (designation includes year: -91).
• Publisher: State standards authority (Gosstandart of the USSR / successor national standards organization—Rosstandart in the Russian Federation). Verify publisher on the official document copy.
• ICS / categories: Assigned to the relevant ICS (International Classification for Standards) group for the product or industry covered — typically within mechanical engineering, materials or product-specific ICS fields. Exact ICS code should be checked in the standard text.
• Edition / version: First edition as issued in 1991 (designation GOST 1180-91). Any later amendments or newer editions are not reflected here.
• Number of pages: Not specified here; official document typically ranges from a short specification (6–20 pages) to longer technical standards. Consult the official PDF or paper copy for the exact page count.

Scope

GOST 1180-91 establishes the technical and quality requirements that manufacturers, suppliers and testing laboratories must meet for the product(s) it covers. The scope normally includes definitions, dimensions and tolerances, material and performance requirements, inspection and test methods, rules for acceptance, marking, packaging and storage. The precise product scope (e.g., wire, fittings, fasteners, sheet, assembly components, etc.) must be determined from the standard's title page and scope clause in the official text.

Key topics and requirements

• Definitions and normative references relevant to the standard's subject.
• Dimensional specifications and permissible tolerances for the product geometry.
• Material and manufacturing requirements, including permitted grades and treatments.
• Inspection and sampling procedures; required tests and test methods.
• Acceptance criteria and nonconformity handling.
• Marking, labelling and documentation required for conformity and traceability.
• Packing, storage and transportation requirements to maintain product integrity.
• Safety and handling notes where applicable.

Typical use and users

Users of GOST 1180-91 typically include manufacturers producing the specified product, quality and conformity assessment laboratories, procurement specialists and technical buyers, design and engineering departments integrating the product into assemblies, and regulatory or certification bodies assessing compliance. The standard is used during design, production control, incoming inspection, supplier qualification and contract specification.

Related standards

Related documents often include earlier or later GOST standards in the same product family, interstate (GOST R, GOST IEC) or regional (COST, EN) standards addressing similar products, and applicable ISO standards that may serve as international equivalents. Exact cross-references and normative references are listed in the official standard text.

Keywords

GOST 1180-91, ГОСТ 1180-91, national standard, specification, technical requirements, dimensions, tolerances, testing, marking, packaging, Gosstandart, Rosstandart.

FAQ

Q: What is this standard?

A: GOST 1180-91 is a national standard issued in 1991 under the GOST system. It contains technical requirements and specifications for the product(s) it covers. The exact product title and clauses appear in the official document.

Q: What does it cover?

A: It covers scope and application, definitions, dimensional and material requirements, inspection and testing methods, acceptance criteria, marking, packing and transportation for the specified product. For precise coverage, consult the standard's scope clause in the official text.

Q: Who typically uses it?

A: Manufacturers, suppliers, engineering and design teams, quality assurance and testing laboratories, procurement professionals, and regulatory or certification bodies working with the covered product.

Q: Is it current or superseded?

A: The document presented here is the 1991 edition (as indicated by the -91 suffix). Its current status (active, amended, or superseded) is not stated here and should be confirmed with the relevant national standards body or an official standards database.

Q: Is it part of a series?

A: Many GOST numbers belong to series of related standards for a product family; GOST 1180-91 may reference or be referenced by other standards. The official normative references and related standard list in the document identify the series relationships.

Q: What are the key keywords?

A: Keywords include product-specific terms plus: GOST 1180-91, ГОСТ 1180-91, specification, dimensions, tolerances, testing, marking, packaging, Gosstandart, Rosstandart.