GOST 2.114-95 PDF

Full title and description

GOST 2.114-95 — Единая система конструкторской документации. Технические условия. Standard that establishes rules for the structure, wording, formatting, coordination and approval of technical specifications (ТУ / “technical conditions” or “specifications”) for products, materials and substances used in engineering and manufacturing.

Abstract

GOST 2.114-95 defines the unified rules and mandatory content for preparation and presentation of technical specifications within the USSR / CIS unified design documentation system (ЕСКД). It sets the required sections, wording conventions, normative references, requirements for safety and testing clauses, and procedures for coordination, approval and amendment of ТУ. The standard was adopted in 1995 and later superseded by a revised interstate standard in 2016.

General information

• Status: Replaced / withdrawn on territory of the Russian Federation — superseded by GOST 2.114-2016 (introduced as national standard 1 April 2017).
• Publication date: Approved 8 August 1995; date of introduction 1 July 1996 (ed. 1995, published editions 1995–2005 with later amendments).
• Publisher: Approved by Gosstandart (State Committee for Standardization); printed editions issued by IPK (Publishing House of Standards); developed by VNIINMASH.
• ICS / categories: ICS 01.110 (Technical product documentation) — group T52 (ЕСКД).
• Edition / version: Original designation GOST 2.114-95 (with published amendments in 2001, 2003 and 2005); superseded by GOST 2.114-2016.
• Number of pages: 16 (typical printed edition; some reprints list 15–16 pages depending on format).

Scope

The standard applies to preparation of technical specifications (ТУ) used to describe and regulate properties, performance, testing, marking, packaging and acceptance of products, materials and substances manufactured or supplied under engineering documentation. It is intended for use where ТУ are part of design documentation produced according to the Unified System for Design Documentation (ЕСКД) and covers content, layout, normative links, approval and change procedures.

Key topics and requirements

• Required structure and mandatory sections of technical specifications (title/introductory part, technical requirements, safety requirements, acceptance and testing, marking, packaging, storage and transport, quality assurance).
• Rules for wording technical requirements: unambiguous phrasing, normative references, units, tolerances and classification of characteristics.
• Formatting and presentation conventions consistent with ЕСКД (designations, headings, tables, annexes and references to other documents).
• Procedures for coordination, approval and registration of ТУ; responsibilities of developer, customer and approving authority.
• Rules for issuing amendments, corrigenda and versioning of ТУ; how to record and publish changes.
• Requirements for safety, labeling, marking, packaging, acceptance testing and documentation to ensure reproducible verification of compliance.

Typical use and users

Primarily used by design engineers, technical writers, product specification authors, QA/QC and regulatory departments in mechanical engineering, instrumentation, manufacturing and supply-chain organizations across CIS countries. Also used by standards and conformity bodies, procurement specialists, and contract authors who prepare or review ТУ attached to contracts and technical documentation.

Related standards

Closely related ЕСКД standards and normative documents that are typically used together: GOST 2.102 (Kinds and completeness of design documents), GOST 2.104 (Title blocks), GOST 2.105 (General requirements for textual documents), GOST 2.201 (Designation of products and design documents) and the successor standard GOST 2.114-2016 which replaces and updates GOST 2.114-95. Other sector- or product-specific ТU and national/international standards are referenced from within.

Keywords

GOST 2.114-95; ЕСКД; technical specifications; ТУ; specifications; drafting rules; document layout; approval; amendments; VNIINMASH; Gosstandart.

FAQ

Q: What is this standard?

A: GOST 2.114-95 is an ЕСКД standard titled "Technical specifications" that establishes rules for preparing, presenting and approving technical specifications (ТУ) used in engineering documentation.

Q: What does it cover?

A: It covers the required structure and content of technical specifications, wording conventions for technical requirements, formatting and layout rules, normative references, safety and testing clauses, and procedures for coordination, approval and amendments.

Q: Who typically uses it?

A: Design and development engineers, technical documentation authors, QA/QC and regulatory staff, procurement and contract specialists, and standards bodies within manufacturing, machinery and instrumentation sectors — particularly in countries applying ЕСКД rules.

Q: Is it current or superseded?

A: GOST 2.114-95 has been superseded — it was replaced by the interstate standard GOST 2.114-2016, which was introduced as a national standard in the Russian Federation on 1 April 2017. For current practice, refer to GOST 2.114-2016 and any subsequent amendments.

Q: Is it part of a series?

A: Yes — it is part of the ЕСКД (Unified System for Design Documentation) family of standards (GOST 2.xx series) that together define document types, layout and drafting rules for engineering documentation.

Q: What are the key keywords?

A: Technical specifications; ТУ; ЕСКД; drafting rules; document layout; approval; amendments; GOST 2.114; VNIINMASH; Gosstandart.