GOST 30515-2013 PDF

Full title and description

GOST 30515-2013 — "Cements. General technical conditions" (Russian: Цементы. Общие технические условия). The standard specifies general technical requirements, classification, and quality control provisions for all types of cement used in construction and industrial applications.

Abstract

This standard establishes terminology, classification principles, composition categories (clinker, mineral additives, blended cements), physical and mechanical property requirements (compressive strength classes, setting times, fineness), test and inspection rules, marking, packaging and storage provisions applicable to cements placed on the market under the GOST designation. It replaces the earlier national GOST edition and has been adopted as the national standard of the Russian Federation.

General information

• Status: Adopted / in force (national standard of the Russian Federation).
• Publication date: Entered into force 1 January 2015 (issued by Rosstandart order dated 4 December 2014). (Standard designation year: 2013).
• Publisher: Federal Agency for Technical Regulation and Metrology (Rosstandart) / interstate GOST system.
• ICS / categories: Cement, gypsum, lime, mortar — ICS classification used for cement standards (e.g., ICS 91.100.10).
• Edition / version: GOST 30515-2013 (current edition implemented 2015) with later amendments/updates recorded in national indexes.
• Number of pages: Typical published text editions list approximately 48 pages (electronic/printed distributions vary by publisher and collected amendments).

Scope

GOST 30515-2013 applies to all types of hydraulic cements and defines uniform technical requirements for composition, physical and mechanical characteristics, testing methods, quality control, marking, packaging and storage. It is intended to be used by manufacturers, testing laboratories, certification bodies and regulatory authorities to ensure conformity of cement products to established safety and performance criteria.

Key topics and requirements

• Classification of cements by purpose, clinker type, composition (including proportions of mineral additives) and strength classes.
• Physical and mechanical requirements: compressive strength at specified ages, initial and final setting times, soundness, and required fineness (specific surface) parameters.
• Requirements for composition and limits on certain components and additives; rules for designation of blended cements.
• Test methods and sampling procedures for verification of declared properties and quality control.
• Marking, packaging, storage and documentation (quality certificates, conformity declarations).
• References to preceding GOST versions and interaction with related technical regulations and standards (see Related standards).

Typical use and users

Primary users include cement manufacturers and formulators, quality and testing laboratories, construction materials suppliers, certification and conformity assessment bodies, contractors and design engineers who reference standardized cement properties for mix design and compliance. Regulatory agencies and procurement authorities use the standard to form procurement specifications and market surveillance criteria.

Related standards

GOST 30515-2013 is related to earlier national GOST editions (it replaces/supersedes the prior GOST 30515-97 edition) and is discussed alongside other Russian cement standards such as GOST 31108-2016 (Cements — technical specifications). Comparisons and conformity discussions have referenced international standards for cement (for example EN 197‑1) in analyses of alignment and market compatibility.

Keywords

GOST 30515-2013, cement, cements, clinker, mineral additives, compressive strength, setting time, fineness, cement classification, technical conditions, Rosstandart.

FAQ

Q: What is this standard?

A: GOST 30515-2013 is a national/interstate standard titled "Cements. General technical conditions" that sets out general requirements, classification and quality-control rules for cements used in construction and industry.

Q: What does it cover?

A: It covers terminology, classification, composition categories, key physical and mechanical properties (strength, setting times, fineness, soundness), sampling and test methods, marking, packaging, storage and documentation requirements for cement products.

Q: Who typically uses it?

A: Cement producers, testing laboratories, conformity assessment bodies, construction materials specifiers, contractors, design engineers and regulatory authorities use the standard for production control, product specification and compliance verification.

Q: Is it current or superseded?

A: GOST 30515-2013 was adopted as the national standard and entered into force on 1 January 2015. It supersedes earlier GOST editions for cement; subsequent amendments and related standards (e.g., GOST 31108-2016) may update related technical requirements, so users should verify whether later amendments or replacement standards apply for specific applications.

Q: Is it part of a series?

A: It is part of the family of GOST standards governing cement and construction materials (interacting with specific technical specifications and test-method standards). It is often referenced together with other GOST documents that specify detailed test methods, product subtypes and conformity assessment procedures.

Q: What are the key keywords?

A: Cement, clinker, mineral additives, compressive strength, setting time, fineness, cement classification, technical conditions, GOST 30515-2013.