GOST R 51112-97 PDF

Full title and description

GOST R 51112-97 — "Средства защитные банковские. Требования по пулестойкости и методы испытаний" (Equipment for bank protection. Bullet‑proof requirements and methods of testing). The standard specifies ballistic (bullet‑resistance) requirements, classification of protection classes and procedures for testing bank protective equipment intended to protect personnel, operations and valuables.

Abstract

This national Russian standard establishes requirements for the ballistic resistance of bank protective equipment (safes, cash desks, screens, armored partitions and similar protective devices) and prescribes methods for laboratory and field testing to verify compliance with protection classes. It defines classification, test specimens, test conditions, acceptance criteria and safety precautions for conducting ballistic tests.

General information

• Status: In force (introduced for the first time; listed as действующий / введен впервые).
• Publication date: Date of entry into force — 1 July 1998 (adopted by Gosstandart by resolution of 23 December 1997).
• Publisher: Gosstandart of the Russian Federation (state standard authority); printed and reissued by publishing houses of standards (IPK / Стандартинформ) in subsequent reprints/editions.
• ICS / categories: OKС/ICS 13.310 (security and protection); OKP 73 9930.
• Edition / version: Original designation GOST R 51112-97 (introduced 1998). Reprints and later compilations include amended/reissued editions (references note reprints with amendments in 1998, 2002, 2003 and later reprints up to 2011).
• Number of pages: Bibliographic/vendor listings commonly report 16 pages for the standard text (vendor copies and commercial entries list 16 pages).

Scope

The standard applies to bank protective equipment designed to ensure safety of bank personnel, protection of banking operations and preservation of valuables. It establishes ballistic resistance requirements (levels/classes), classification of items to be tested, the test procedures (ballistic firing conditions, ammunition and velocity ranges, mounting and backing of specimens), acceptance criteria for penetration and damage, and safety requirements for testing. It is intended for use by manufacturers, testing laboratories, certification bodies, designers, security integrators and insurers involved with bank physical security.

Key topics and requirements

• Classification of bank protective devices by protection class (ballistic resistance levels) and definition of test specimens and mounting conditions.
• Specified test ammunition types, velocities and firing geometries to verify resistance to penetration, spalling and other failure modes.
• Pass/fail criteria for penetration, deformation and functional integrity after ballistic impact.
• Methods for conducting laboratory and field ballistic tests, including instrumentation, measurement and reporting requirements.
• Safety requirements for test execution and handling of test equipment and samples.
• Annexes listing typical items subject to testing and bibliographical references.

Typical use and users

Used by designers and manufacturers of safes, cash desks, teller screens, armored doors and other bank security hardware to specify and verify ballistic performance; by test laboratories and certification bodies to perform conformity assessment; by banks and security departments to select products meeting required protection classes; and by insurers and procurement specialists to reference minimum ballistic standards for risk management and procurement.

Related standards

Standards commonly referenced together with GOST R 51112-97 include other Russian standards on mechanical and ballistic testing and security devices such as GOST R 51110-97, GOST R 50941-96, GOST 30247.0-94 and related test and classification documents used for locks, doors and armored constructions; the normative references listed in the standard provide the complete set used for test methods and conditions.

Keywords

bank protection; ballistic resistance; bullet‑proof; ballistics testing; protection classes; safes; armored doors; test methods; certification; ГОСТ Р 51112-97.

FAQ

Q: What is this standard?

A: A Russian national standard that sets ballistic (bullet‑resistance) requirements and test methods for bank protective equipment (safes, teller screens, armored partitions, doors, etc.).

Q: What does it cover?

A: Classification of protection classes, detailed ballistic test procedures (ammunition types, velocities, firing geometry), acceptance criteria for penetration/damage, specimen preparation and safety measures for running ballistic tests.

Q: Who typically uses it?

A: Manufacturers of bank security products, test laboratories, certification bodies, banks and security integrators, procurement and insurance specialists.

Q: Is it current or superseded?

A: The standard was introduced on 1 July 1998 and is recorded in national databases with later reprints/amendments; available bibliographic records list updates/reprints (including compilation editions) — users should check the national standards registry or the official consolidated text for the latest status and any amendments before relying on it for certification or procurement.

Q: Is it part of a series?

A: It belongs to a family of national standards addressing physical security, ballistic resistance and testing of protective devices (other related GOST/GOST R standards cover locks, doors, armored constructions and specific test methods). The normative references within the standard list related documents.

Q: What are the key keywords?

A: Ballistic resistance, bullet‑proof, bank protection, safes, armored doors, test methods, protection classes, ГОСТ Р.