SHNK 3.06.03-08 PDF

Full title and description

SHNK 3.06.03-08 (ШНК 3.06.03-08) — "Автомобильные дороги" / "Motor roads". National Uzbek urban-planning / construction regulation covering classification, design parameters, pavement structures, drainage, construction and reconstruction practices for public (general-use) automobile roads.

Abstract

This document provides normative requirements and technical rules for planning, design, construction, reconstruction and maintenance of automobile roads in the Republic of Uzbekistan. It defines geometric standards, loading and traffic considerations, pavement layer composition and materials, drainage and safety provisions, and references related ShNK and technical safety rules applicable during execution and operation.

General information

• Status: Replaced / superseded by the new construction regulation SR/QR 06.03-23 (Construction Regulation 06.03 — "Automobile roads"); SHNK 3.06.03-08 is therefore not the current primary regulatory text for new works.
• Publication date: 2008 (the "-08" suffix indicates the 2008 issue year of this SHNK document).
• Publisher: Issued as part of the ShNK series of urban-planning and construction norms of the Republic of Uzbekistan (documents and guidance for ShNK are published/maintained by national construction authorities / Ministry of Construction and related state bodies).
• ICS / categories: Road engineering / Civil engineering — ICS 93.080 (road construction / road engineering).
• Edition / version: SHNK 3.06.03-08 (original 2008 edition); superseded by SR/QR 06.03-23 (2023 construction regulation replacing earlier SHNK rules for automobile roads).
• Number of pages: Approximately 124 pages (typical page count reported in public document listings and vendor catalogs).

Scope

SHNK 3.06.03-08 covers design and construction requirements for automobile roads of general use within Uzbekistan, including geometric design, pavement composition and layer thicknesses, material requirements, drainage and roadside works, traffic safety elements (signs, markings, barriers), quality control during construction and rules for reconstruction and major repairs. The document historically applied to public and service roads but excluded certain temporary or trial/test roads; it also referenced complementary ShNK and safety-sanitary regulations that must be observed in practice.

Key topics and requirements

• Classification of roads and assignment of functional and technical categories (design speed, lane width, axle and traffic loads).
• Geometric design standards: alignment, cross-sections, superelevation, gradients and sight distances.
• Pavement engineering: recommended layer structures for flexible and rigid pavements, material specifications and required thicknesses for typical loadings.
• Subgrade preparation, drainage design (longitudinal and transverse drainage), and erosion control measures.
• Construction, reconstruction and rehabilitation procedures, compaction and quality-control testing.
• Traffic safety elements: road markings, signs, guardrails, pedestrian facilities and interchange/junction layout rules.
• Inspection, maintenance planning and repair criteria, plus references to occupational safety and sanitary requirements during works.

Typical use and users

Engineers and designers working on road design and rehabilitation projects in Uzbekistan; contracting and construction companies executing highway works; public road authorities and municipal services responsible for planning and asset management; technical inspectors and laboratory personnel performing quality control; and academic/training institutions teaching highway engineering and construction practices.

Related standards

The SHNK 3.06.03-08 content is related to other ShNK and KMK construction norms, national technical regulations and sectoral documents for road materials and testing. It has been formally superseded by the Construction Regulation SR/QR 06.03-23 for automobile roads; practitioners should consult SR/QR 06.03-23 and current ShNK/KMK updates for up-to-date requirements.

Keywords

SHNK 3.06.03-08; Automobile roads; Motor roads; Pavement design; Road construction; Road reconstruction; Drainage; Road safety; Uzbekistan; ShNK norms; ICS 93.080.

FAQ

Q: What is this standard?

A: SHNK 3.06.03-08 is a national Uzbek construction/urban-planning norm titled "Автомобильные дороги" (Motor roads) that provided technical rules for the design, construction and reconstruction of automobile roads.

Q: What does it cover?

A: It covers road classification, geometric design, pavement composition and materials, drainage, construction and reconstruction methods, quality control and safety elements for public roads (with some exclusions such as temporary/test tracks noted in the original text).

Q: Who typically uses it?

A: Road designers, civil engineers, contractors, public road agencies, inspectors and university/technical trainers involved in highway engineering and construction in Uzbekistan.

Q: Is it current or superseded?

A: Superseded — SHNK 3.06.03-08 has been replaced by the newer Construction Regulation SR/QR 06.03-23 (Construction Regulation 06.03 — "Automobile roads"), which is the active regulatory text for automobile road works. Users should follow SR/QR 06.03-23 for current mandatory requirements.

Q: Is it part of a series?

A: Yes — it is part of the ShNK series (Shaharsozlik / градостроительные norms and rules) covering urban planning, design and construction topics; related KMK and other ShNK documents provide complementary technical and procedural requirements.

Q: What are the key keywords?

A: Automobile roads; Motor roads; Pavement; Road design; Road reconstruction; Drainage; Road safety; ShNK; Uzbekistan; ICS 93.080.