SNT 3.04.08-94 PDF

Full title and description

SNT 3.04.08-94 (СНТ 3.04.08-94) — "Production / Industrial buildings" (standard establishing technical requirements and design rules for industrial (production) buildings and related structural and planning solutions).

Abstract

This standard sets out requirements for the planning, architectural‑structural solutions and basic design provisions for production (industrial) buildings. It is intended to unify dimensional schemes, load considerations and basic safety and serviceability rules used when designing one‑ and multi‑storey industrial facilities.

General information

• Status: Active (document offered in electronic formats by standards distributors).
• Publication date: 1994 (approved by the Ministry of Construction and Architecture of Turkmenistan by Resolution No. 6 dated 16 December 1994).
• Publisher: Ministry of Construction and Architecture of Turkmenistan (approval authority noted in the standard's adoption documents).
• ICS / categories: Construction and buildings — ICS 91 (notably 91.040 "Buildings" and subcategory 91.040.20 "Buildings for commerce and industry").
• Edition / version: Original edition, year‑marked "-94" (1994 edition).
• Number of pages: 22 (electronic edition/page count as listed by standards distributors).

Scope

The scope covers architectural and constructive requirements for production and industrial buildings: general planning and layout rules, recommended dimensional grids and gabarits, basic structural considerations for floors and roofs, normative loads for equipment and operations, and references to related installation and safety norms used in the national building regulatory framework. The standard is intended for use at project and design stages for new industrial facilities and in works affecting building configuration.

Key topics and requirements

• Terminology and definitions specific to production buildings.
• Recommended dimensional grids, bay spacing and gabarits for single‑ and multi‑storey industrial structures.
• Design loads for floors, roof structures and service platforms (including equipment and transport loads).
• Basic structural and layout rules to facilitate modular construction and equipment placement.
• References and cross‑links to related installation, HVAC, fire safety and sanitary norms applicable to industrial buildings.

Typical use and users

SNT 3.04.08-94 is typically used by architects, structural and civil engineers, project designers, construction authorities and consultants involved in the design, review and approval of industrial (production) buildings. It is referenced during schematic and detailed design phases to ensure conformity with national building planning and structural requirements.

Related standards

The standard is part of a set of national construction norms and is published alongside other SNT/SNiP/CCT documents addressing administrative/public buildings, installations (heating, ventilation, sanitation) and specialized design codes. Documents commonly referenced with it include neighbouring SNT entries from the same series (for example, SNT 3.04.07-94 and SNT 3.05.02-94 are listed in related collections).

Keywords

Production buildings; industrial buildings; building design; dimensional grids; structural loads; Turkmenistan construction standard; SNT 3.04.08-94.

FAQ

Q: What is this standard?

A: SNT 3.04.08-94 is a national construction standard (designation СНТ 3.04.08-94) that specifies requirements and recommended practices for the design and planning of production (industrial) buildings.

Q: What does it cover?

A: It covers layout and planning principles, recommended dimensional schemes (bay spacing/gabarits), basic structural and load considerations for floors and roofs, and cross‑references to installation and safety rules relevant to industrial facilities.

Q: Who typically uses it?

A: Architects, structural and civil engineers, design offices, project reviewers and regulatory bodies working on industrial and production building projects.

Q: Is it current or superseded?

A: The standard is presented in distributor catalogs as the 1994 edition (SNT 3.04.08-94) and shown as active in those listings; users should verify with the national authority or current national regulatory compilations for any later amendments, replacements or regional applicability updates.

Q: Is it part of a series?

A: Yes — it belongs to a family of SNT/SNiP/CCT construction and building norms addressing different building types and services; adjacent items in the series address administrative/public buildings, HVAC, sanitation and other construction disciplines.

Q: What are the key keywords?

A: Production buildings, industrial buildings, building grids, structural loads, design requirements, SNT 3.04.08-94.