SP 28.13330.2017 PDF

Full title and description

SP 28.13330.2017 — "Protection against corrosion of construction" (Russian: СП 28.13330.2017 «Защита строительных конструкций от коррозии»). This set of rules is an updated edition of СНиП 2.03.11‑85 and provides requirements and recommendations for design, selection and application of corrosion‑protection measures for building and structural elements made of concrete, reinforced concrete, steel, aluminium, wood, stone and chrysotile‑cement in new and reconstructed buildings and structures.

Abstract

SP 28.13330.2017 establishes classification of corrosive environments, principles for choosing protective systems (primary, secondary and special protection), technical requirements for coatings, isolation, cathodic and other protection methods, measures for buried and submerged elements, and rules for maintenance and restoration to achieve required service life of building structures. It consolidates and modernizes earlier СНиП provisions for corrosion protection in building practice.

General information

• Status: Effective / Current (implemented as a set of rules replacing earlier editions of СНиП on corrosion protection).
• Publication date: Approved by the Ministry of Construction of the Russian Federation on 27 February 2017; introduced / came into force in 2017 (document entry into force published 28 August 2017 / implementation dates in 2017).
• Publisher: Ministry of Construction, Housing and Communal Services of the Russian Federation (Minstroy); registered with the Federal Agency for Technical Regulation and Metrology (Rosstandart).
• ICS / categories: Construction / corrosion protection; related OKC/technical committees for construction materials and anticorrosive protection (examples cited in development records: OKC 91.080.x family).
• Edition / version: SP 28.13330.2017 (updated edition of СНиП 2.03.11‑85). Amendments and revisions have been published (Amendments No.1, No.2, No.3 and subsequent updates).
• Number of pages: Published editions on commercial catalogs report typical page counts in the range ~118–156 pages depending on format/translation; common published print listings show 156 pages.

Scope

Applies to design and specification of corrosion‑protection measures for building structures (concrete, reinforced concrete, steel, aluminium, timber, stone and chrysotile‑cement) in new construction and reconstruction projects. Covers selection of protection methods for atmospheric, soil, groundwater and chemically aggressive environments, as well as requirements for protective materials, application technologies, inspection, maintenance and calculation of expected service life of protection systems.

Key topics and requirements

• Classification of corrosive environments and degrees of aggressiveness (atmospheric, soil, groundwater, industrial/aggressive media).
• Principles for selection of protection: primary (material and design choices), secondary (coatings, impregnations), and special (cathodic protection, isolation, composite systems).
• Technical requirements for paint/coating systems, mastics, polymeric linings, bituminous and epoxy systems, and for application and quality control of coatings.
• Requirements for buried, submerged and soil‑contact structures including isolation, reinforced coatings and wrapping methods.
• Design rules addressing corrosion of concrete and reinforced concrete (chloride/carbonate attack, biological effects) and protective measures to meet target service life.
• Inspection, monitoring, restoration and repair procedures, and consideration of life‑cycle costs when selecting protection options.
• References to related GOSTs, SNIP/SP documents and technical normative acts used to support materials and test methods.

Typical use and users

Used by structural and corrosion engineers, design institutes, contractors and applicators of protective systems, building owners and asset managers, inspection and certification bodies, and regulatory authorities in Russia and neighbouring jurisdictions. It is referenced in project specifications, tender documents and maintenance plans where compliance with national building rules is required.

Related standards

Related normative documents include the original СНиП 2.03.11‑85 (historical basis), earlier and parallel SP/GOST documents on concrete and steel structures, coating test methods and corrosion‑related GOSTs (examples: SP 72.13330.x series, GOST 9.602 and other material‑specific standards). SP 28.13330.2017 is cross‑referenced by and harmonised with other SPs for structural materials and protective systems.

Keywords

corrosion protection, anticorrosive coatings, coatings, cathodic protection, isolation, concrete protection, reinforced concrete, steel structures, soil corrosion, service life, SNiP, SP 28.13330.2017.

FAQ

Q: What is this standard?

A: SP 28.13330.2017 is the Russian set of rules titled "Protection against corrosion of construction" — an updated edition of СНиП 2.03.11‑85 that sets out requirements and recommendations for corrosion protection of building structures.

Q: What does it cover?

A: It covers classification of corrosive environments, selection of protection strategies (primary, secondary, special), technical requirements for coatings and isolation, rules for buried/submerged elements, inspection and maintenance, and calculation/justification of protection to meet expected service life.

Q: Who typically uses it?

A: Structural and corrosion engineers, design organisations, contractors and applicators of anticorrosive systems, building owners, inspectors and regulators working on projects in Russia and neighbouring states that reference Russian norms.

Q: Is it current or superseded?

A: SP 28.13330.2017 is the current approved edition (as of its 2017 approval) and has received subsequent amendments (No.1, No.2, No.3 and later updates). Users should check for the latest amendment notices and errata before application.

Q: Is it part of a series?

A: Yes — it is part of the SP/SNiP family of construction codes and is referenced alongside other SP documents addressing concrete, steel and timber structures and protective treatments (for example related SP and GOST documents addressing test methods and material requirements).

Q: What are the key keywords?

A: corrosion, anticorrosive protection, coatings, cathodic protection, isolation, concrete protection, steel protection, service life, SP 28.13330.2017.